HS-810S · Bidirectional reinforcement
Mesh tape
for cables.
Single-sided tape combining polyester film (PET), mesh fiberglass cloth and a composite special adhesive for cable shape fixing and protective bundling.
Applications
Shape fixing.
Protective bundling.
Mesh reinforcement combines tensile strength, low elongation and wear resistance. Listed applications include:
- Shape fixing and protective bundling of cables.
- Fixing cable components.
- Bonding and laminating products.
- Bonding of insulation materials and positioning in electronics, subject to validation.
The supplied TDS does not specify dielectric strength or a flame rating. Do not assume this product replaces a rated electrical insulation tape.
Explore cable applications →Technical data
Product
specifications.
Data from the technical data sheet. Test conditions: 23 ± 2°C and 60% RH. Listed methods: GB-4852-84, GB-2792-98 and GB-7753-84. Results are not guaranteed values; conduct a trial before bulk application.
Open HS-810S TDS ↗| Property | Value / condition |
|---|---|
| Total thickness | 180 ± 10 μm |
| Width | 1020 mm |
| Weight | 110 ± 10 g/m² |
| Warp density | 8 ± 1 counts / 25 mm |
| Weft density | 8 ± 1 counts / 25 mm |
| Tensile strength | ≥ 250 N / 25 mm |
| Elongation at break | ≤ 6% |
| Temperature resistance | 0–60°C |
| Application temperature | 5–40°C |
| Shelf life | 6 months at 20°C and 50% RH |
Use and storage
Prepare the surface.
Control the conditions.
Application
Clean and dry the surface, removing grease and other contaminants. Apply between 5°C and 40°C, preferably in cool, dry conditions. Wrap evenly without wrinkles and confirm application tension through a trial following the TDS.
Storage
Store packaged in a cool, dry place away from direct sunlight, freezing and high temperatures. Optimal conditions: 5–30°C and 40–60% RH. Use first-in, first-out stock rotation.
Shelf life
6 months when stored at 20°C and 50% RH. This condition is specific to HS-810S.